Terotechnica Asset Management College

Administration (8)

Tuesday, 24 January 2023 12:23

Study Loans / Discount

We understand that the cost of study may cause many students to rather forego their ambitions. We thus provide you with possibilities of obtaining study loans and getting discount for study.

1. Study loans

Disclaimer: The content below regarding study loans are obtained from Fundi. We made sure that we copied it correctly to this website page for the convenience of students, but we do not take responsibility for any difficulties that you encounter with that institution.

Study loans may be obtained from Fundi (https://fundi.co.za)

To get such a loan, the following criteria should be abided by. Please take careful note of the following below…..

To qualifying for a study loan and/or a loan to purchace a study device (such as a laptop) with Fundi:

you need to be permanently employed.
you need to be accepted or registered with a training institution.
you need to earn at least R2500.00 of disposable income after deductions.

Required documents that should be submitted with the application:

Recent payslip (not older than 3 months).
In the case of applying for a study loan, a statement of fees or quote from Terotechnica.
In the case of a device loan, current proof of registration with Terotechnica.
Copy of ID document.

Application forms can be downloaded here:

Completed application and documents needs to be send directly to This email address is being protected from spambots. You need JavaScript enabled to view it.

NB: You have up to 36 months to pay back the educational loan.

Devices can be obtained from https://shop.fundi.co.za/

2. Discounts

Private students are eligible for discounts under certain circumstances.

There are two ways that a private student can receive discount from Terotechnica: Immediate Payment and Placement Payment.

1. Immediate Payment
In a case of an immediate full settlement of the total amount of the quotation, the student is entitled to 30% discount. The “immediate full settlement” is then the full amount of the quotation, less 30%. This offer is only valid for five (5) days from the date of the quotation.

2. Placement Payment
If the student for some reason cannot do immediate/full settlement payment, as described above he/she does not qualify for the full 30% discount but can still receive a discount according to the following schedule below, on payment of a R2000 placement fee.
The discount that can be secured is as follows:

25% if the placement fee is paid within the first five (5) days of the date of the quotation.
20% if the placement fee is paid between day six (6) and day ten (10) of the date of the quotation.
15% if the placement fee is paid between day eleven (11) and day ten (15) of the date of the quotation.
10% if the placement fee is paid between day sixteen (16) and day twenty (20) of the date of the quotation.
5% if the placement fee is paid between day twenty-one (21) and day twenty-five (25) of the date of the quotation.

Nevertheless, the total price of the specific course, less discount secured, must be paid before course attendance.

N.B the discount is only available on short and comprehensive courses (diplomas are already priced at a discount).

Published in Administration

Thursday, 10 October 2019 10:30

Course information at a glance 2020

Important note: If this table and the calendar on the right interferes with each other, press Control+minus repeatedly to reduce the font size, until you can see well enough.



*COURSE SCHEDULE :* *2020*


*Course code*	*Course description*	*Duration Days*	*Dates*	*Cost*
*Course code*	*Course description*	*Duration Days*	*Dates*	*Excl VAT*
*C101*	Asset Management for Artisans	*2 days*	1st course: 27 - 28 January	R 6 399
			2nd course: 17 - 18 February
			3rd course: 15 - 16 April
			4th course: 13 - 14 May
			5th course: 22 - 23 June
			6th course: 20 - 21 July
			7th course: 12 - 13 August
			8th course: 21 - 22 September
			9th course: 27 - 28 October
			10th course: 10 - 11 November
*C201*	Asset Management for Maintenance Supervisors	*5 days*	1st course: 27 - 31 January	R 15 999
			2nd course: 24 - 28 February
			3rd course: 23 - 27 March
			4th course: 4 - 8 May
			5th course: 1 - 5 June
			6th course: 29 June - 3 July
			7th course: 27 - 31 July
			8th course: 24 - 28 August
			9th course: 28 September - 2 October
			10th course: 26 - 30 October
			11th course: 23 - 27 November
*C301*	Maintenance Planning	*5 days*	1st course: 20 - 24 January	R 15 999
			2nd course: 17 - 21 February
			3rd course: 16 - 20 March
			4th course: 20 - 24 April
			5th course: 18 - 22 May
			6th course: 22 - 26 June
			7th course: 20 - 24 July
			8th course: 17 - 21 August
			9th course: 14 - 18 September
			10th course: 12 - 16 October
			11th course: 9 - 13 November
			12th course: 7 - 11 December
*C302*	Advanced Maintenance Planning	*5 days*	1st course: 10 - 14 February	R 15 999
			2nd course: 30 March - 3 April
			3rd course: 11 - 15 May
			4th course: 29 June - 3 July
			5th course: 3 - 7 August
			6th course: 7 - 11 September
			7th course: 19 - 23 October
			8th course: 30 November - 4 December
*C501*	Maintenance Shutdown and Project Management (Please see footnote for computer requirement)	*5 days*	1st course: 3 - 7 February	R 16 585
			2nd course: 9 - 13 March
			3rd course: 20 - 24 April
			4th course: 25 - 29 May
			5th course: 29 June - 3 July
			6th course: 3 - 7 August
			7th course: 28 September - 2 October
			8th course: 2 - 6 November
			9th course: 7 - 11 December
*C702*	Reliability Engineering in Asset Management (Please see footnote for computer requirement)	*5 days*	1st course: 16 - 20 March	R 17 805
			2nd course: 11 - 15 May
			3rd course: 27 - 31 July
			4th course: 14 - 18 September
			5th course: 16 - 20 November
*C901*	Maintenance Practice for Asset Management Engineers (Please see footnote for computer requirement)	*5 days*	1st course: 24 - 28 February	R 16 599
			2nd course: 30 March - 3 April
			3rd course: 22 - 26 June
			4th course: 31 August - 4 September
			5th course: 26 - 30 October
*C902*	Leadership in Asset Management	*5 days*	1st course: 10 - 14 February	R 16 599
			2nd course: 4 - 8 May
			3rd course: 13 - 17 July
			4th course: 12 - 16 October
*C903*	RCM Facilitation and Analysis (Please see footnote for computer requirement)	*5 days*	1st course: 20 - 24 January	R 16 599
			2nd course: 2 - 6 March
			3rd course: 18 - 22 May
			4th course: 6 - 10 July
			5th course: 7 - 11 September
			6th course: 2 - 6 November
*C904*	RCM ProAktiv, Advanced Reliability Centred Maintenance (Please see footnote for computer requirement) Please note that this course has a pre-requirement. Students must already have done both C702 and S801 (or C903) before enrolling for this course. This is to ensure that participants will adequately cope with the course content. Exceptions to this rule is possible, but will have to be suitably motivated. This course thus builds on the foundation already established in our C702 and S801 courses. Apart from shortly revisiting the Reliability and RCM foundations, the student should be in a position to quickly grasp and use the advanced concepts as taught in this course.	*5 days*		R 16 599



			1st course: 25 - 29 May
			2nd course: 31 August - 4 September




*S801*	Reliability Centred Maintenance (Please see footnote for computer requirement)	*3 days*	1st course: 20 - 22 January	R 10 205
			2nd course: 2 - 4 March
			3rd course: 18 - 20 May
			4th course: 6 - 8 July
			5th course:7 - 9 September
			6th course: 2 - 4 November
*S802*	Asset Management for Executives	*3 days*	1st course: 4 - 6 February	R 10 205
			2nd course: 6 - 8 April
			3rd course: 27 - 29 July
			4th course: 6 - 8 October
*S803*	Root Cause Failure Analysis	*5 days*	1st course: 27 - 31 January	R 18 295
			2nd course: 2 - 6 March
			3rd course: 20 - 24 April
			4th course: 8 - 12 June
			5th course: 13 - 17 July
			6th course: 24 - 28 August
			7th course: 5 - 9 October
			8th course: 16 - 20 November
*S804*	Decision Making in Maintenance (Please see footnote for computer requirement)	*5 days*	1st course: 3 - 7 February	R 17 865
			2nd course: 9 - 13 March
			3rd course: 20 - 24 April
			4th course: 8 - 12 June
			5th course: 20 - 24 July
			6th course: 31 August - 4 September
			7th course: 12 - 16 October
			8th course: 23 - 27 November
*S805*	Maintenance Control	*2 days*	1st course: 23 - 24 January	R 6 399
			2nd course: 24 - 25 February
			3rd course: 29 - 30 April
			4th course: 11 - 12 May
			5th course: 1 - 2 June
			6th course: 7 - 8 July
			7th course: 12 - 13 August
			8th course: 21 - 22 September
			9th course: 3 - 4 November
*S808*	Asset Management Logistics	*3 days*	1st course: 29 - 31 January	R 9 599
			2nd course: 6 - 8 April
			3rd course: 17 - 19 June
			4th course: 18 - 20 August
			5th course: 20 - 22 October
			6th course: 8 - 10 December
*S811*	Water Treatment Plant Operation and Maintenance	*3 days*	1st course: 11 - 13 February	R 11 605
			2nd course: 23 -25 March
			3rd course: 15 - 17 April
			4th course: 17 - 19 June
			5th course: 6 - 8 July
			6th course: 21 - 23 September
			7th course: 17 - 19 November
*S812*	Road Maintenance	*2 days*	1st course: 26 - 27 February	R 6 399
			2nd course: 26 - 27 March
			3rd course: 29 - 30 April
			4th course: 24 - 25 June
			5th course: 9 - 10 July
			6th course: 21 - 22 September
			7th course: 19 - 20 October
			8th course: 1 - 2 December
*S813*	Economical Replacement and Life Cycle Management (Please see footnote for computer requirement)	*5 days*	1st course: 17 - 21 February	R 16 499
			2nd course: 23 - 27 March
			3rd course: 25 - 29 May
			4th course: 13 - 17 July
			5th course: 7 - 11 September
			6th course : 26 - 30 October
*S820*	What is Asset Management and how does it differ from Maintenance?	*2 days*	1st course: 19 - 20 February	R 6 399
*S820*		*2 days*		R 6 399
*S821*	Understanding ISO 55000	*3 days*	1st course: 22 - 24 July	R 9 599
*S822*	Implementing ISO 55000	*3 days*	1st course: 21 - 23 October	R 9 599
*Diploma in Maintenance Management*		For comprehensive information on our choice of 5 diplomas,		R 64 385
*Diploma in Maintenance Management*		please visit our website www.terotechnica.com		R 64 385

*Footnote*: Students enrolling for these courses: C501, C702, C901, C903, C904, S801, S804 and S813, must be in possession of their own laptop computers. Computers supplied by employers often have safety features installed which prevent students free access to all the programs and functions required for the course.



*In-house training:*

1.	Please note that considerable savings, both in time and money, can be brought about by having any of the above courses presented in-house. Attractive discounts are offered. Please contact us for quotations. Terms and conditions apply.

2.	Comprehensive information regarding all diplomas and courses is available on our website www.terotechnica.com

Published in Administration

Friday, 04 January 2019 13:01

Course information at a glance 2019

Important note: If this table and the calendar on the right interferes with each other, press Control+minus repeatedly to reduce the font size, until you can see well enough.



*COURSE SCHEDULE :* *2019*


*Course code*	*Course description*	*Duration Days*	*Dates*	*Cost*
*Course code*	*Course description*	*Duration Days*	*Dates*	*Excl VAT*
*C101*	Asset Management for Artisans	*2 days*	1st course: 28 - 29 January	R 5 929
			2nd course: 18 - 19 February
			3rd course: 18 - 19 March
			4th course: 15 - 16 April
			5th course: 20 - 21 May
			6th course: 24 - 25 June
			7th course: 22 - 23 July
			8th course: 5 - 6 August
			9th course: 25 - 26 September
			10th course: 28 - 29 October
			11th course: 13 - 14 November
*C201*	Asset Management for Maintenance Supervisors	*5 days*	1st course: 14 - 18 January	R 14 825
			2nd course: 11 - 15 February
			3rd course: 11 - 15 March
			4th course: 8 - 12 April
			5th course: 13 - 17 May
			6th course: 10 - 14 June
			7th course: 8 - 12 July
			8th course: 19 - 23 August
			9th course: 9 - 13 September
			10th course: 7 - 11 October
			11th course: 25 - 29 November
*C301*	Maintenance Planning	*5 days*	1st course: 21 - 25 January	R 14 825
			2nd course: 18 - 22 February
			3rd course: 25 - 29 March
			4th course: 13 - 17 May
			5th course: 3 - 7 June
			6th course: 1 - 5 July
			7th course:12 - 16 August
			8th course:16 - 20 September
			9th course:14 - 18 October
			10th course:11 - 15 November
			11th course: 9 - 13 December
*C302*	Advanced Maintenance Planning	*5 days*	1st course: 11 - 15 February	R 15 685
			2nd course: 8 - 12 April
			3rd course: 20 - 24 May
			4th course: 29 July - 2 August
			5th course: 21 - 25 October
			6th course: 2 - 6 December
*C501*	Maintenance Shutdown and Project Management (Please see footnote for computer requirement)	*5 days*	1st course: 4 - 8 February	R 15 239
			2nd course: 11 - 15 March
			3rd course: 13 - 17 May
			4th course: 22 - 26 July
			5th course:26 - 30 August
			6th course: 30 September - 4 October
			7th course: 18 - 22 November
			8th course: 9 - 13 December
*C702*	Reliability Engineering in Asset Management (Please see footnote for computer requirement)	*5 days*	1st course: 25 February - 1 March	R 16 195
			2nd course: 10 - 14 June
			3rd course: 14 - 18 October
*C901*	Maintenance Practice for Asset Management Engineers (Please see footnote for computer requirement)	*5 days*	1st course: 28 January - 1 February	R 15 425
			2nd course: 1 - 5 April
			3rd course: 1 - 5 July
			4th course: 2 - 6 September
			5th course: 28 October - 1 November
*C902*	Leadership in Asset Management	*5 days*	1st course: 28 January - 1 February	R 15 425
			2nd course: 4 - 8 March
			3rd course: 1 - 5 April
			4th course: 27 - 31 May
			5th course:15 - 19 July
			6th course:26 - 30 August
			7th course:14 - 18 October
			8th course: 25 - 29 November
*C903*	RCM Facilitation and Analysis (Please see footnote for computer requirement)	*5 days*	1st course: 25 February - 1 March	R 15 425
			2nd course: 1 - 5 April
			3rd course: 3 - 7 June
			4th course:12 - 16 August
			5th course: 7 - 11 October
			6th course: 4 - 8 November
			7th course: 2 - 6 December
*C904*	RCM ProAktiv, Advanced Reliability Centred Maintenance (Please see footnote for computer requirement) Please note that this course has a pre-requirement. Students must already have done both C702 and C903 before enrolling for this course. This is to ensure that participants will adequately cope with the course content. Exceptions to this rule is possible, but will have to be suitably motivated. This course thus builds on the foundation already established in our C702 and C903 courses. Apart from shortly revisiting the Reliability and RCM foundations, the student should be in a position to quickly grasp and use the advanced concepts as taught in this course.	*5 days*		R 15 425



			1st course: 28 January - 1 February
			2nd course: 27 - 31 May
			3rd course: 2 - 6 September



*S801*	Reliability Centred Maintenance (Please see footnote for computer requirement)	*3 days*	1st course: 25 - 27 February	R 9 495
			2nd course: 1 - 3 April
			3rd course: 3 - 5 June
			4th course: 12 - 14 August
			5th course:7 - 9 October
			6th course: 4 - 6 November
			7th course: 2 - 4 December
*S802*	Asset Management for Executives	*3 days*	1st course: 25 - 27 March	R 9 495
			2nd course: 20 - 22 May
			3rd course: 29 - 31 July
			4th course: 16 - 18 September
*S803*	Root Cause Failure Analysis	*5 days*	1st course: 21 - 25 January	R 16 715
			2nd course: 4 - 8 March
			3rd course: 27 - 31 May
			4th course:10 - 14 June
			5th course: 19 - 23 August
			6th course: 21 - 25 October
			7th course: 2 - 6 December
*S804*	Decision Making in Maintenance (Please see footnote for computer requirement)	*5 days*	1st course: 4 - 8 February	R 16 325
			2nd course: 8 - 12 April
			3rd course: 24 - 28 June
			4th course:30 September - 4 October
			4th course: 9 - 13 December
*S805*	Maintenance Control	*2 days*	1st course: 18 - 19 March	R 5 929
			2nd course: 17 - 18 April
			3rd course: 5 - 6 August
			4th course: 25 - 26 September
			5th course: 4 - 5 November
*S808*	Asset Management Logistics	*3 days*	1st course: 30 January - 1 February	R 8 895
			2nd course: 23 - 25 April
			3rd course: 18 - 20 June
*S811*	Water Treatment Plant Operation and Maintenance	*3 days*	1st course: 14 - 16 January	R 10 895
			2nd course: 25 -27 March
			3rd course: 23 - 25 April
			4th course: 18 - 20 June
			5th course: 8 - 10 July
			6th course: 25 - 27 September
			7th course: 18 - 20 November
*S812*	Road Maintenance	*2 days*	1st course: 17 - 18 January	R 5 929
			2nd course: 11 - 12 March
			3rd course:2 - 3 May
			4th course: 24 - 25 June
			5th course: 11 - 12 July
			6th course: 25 - 26 September
			7th course: 21 - 22 October
*S813*	Economical Replacement and Life Cycle Management (Please see footnote for computer requirement)	*5 days*	1st course: 18 - 22 February	R 15 225
			2nd course: 15 - 19 July
			3rd course:9 - 13 September
			3rd course : 28 October - 1 November
*S820*	What is Asset Management and how does it differ from Maintenance?	*2 days*	1st course: 15 - 16 April	R 5 929
*S820*		*2 days*	2nd course: 15 - 16 August	R 5 929
*S821*	Understanding ISO 55000	*3 days*	1st course: 24 - 26 July	R 8 895
*S822*	Implementing ISO 55000	*3 days*	1st course: 23 - 25 October	R 8 895
*Diploma in Maintenance Management*		For comprehensive information on our choice of 5 diplomas,		R 59 615
*Diploma in Maintenance Management*		please visit our website www.terotechnica.com		R 59 615

*Footnote*: Students enrolling for these courses, C501, C702, C901, C903, C904, S801, S804 and S813, must be in possession of their own laptop computers. Computers supplied by employers often have safety features installed which prevent students free access to all the programs and functions required for the course.



*In-house training:*

1.	Please note that considerable savings, both in time and money, can be brought about by having any of the above courses presented in-house. Attractive discounts are offered. Please contact us for quotations. Terms and conditions apply.

2.	Comprehensive information regarding all diplomas and courses is available on our website www.terotechnica.com

Published in Administration

Wednesday, 08 November 2017 15:44

Course information at a glance 2018

Important note: If this table and the calendar on the right interferes with each other, press Control+minus repeatedly to reduce the font size, until you can see well enough.

				*Pretoria:* Tel 082 855 8016 *Vanderbijlpark:* ((016)932-1629 7(016)932-2810 +P.O. Box 4627, Vanderbijlpark, 1900

*COURSE SCHEDULE :* *2018*

MERSETA accredited: Accreditation no. 17-QA/ACC/0896/13

*Course code*	*Course description*	*Duration Days*	*Dates*	*CPD Credits*	*Cost*
					*Excl VAT*
*C101*	Asset Management for Artisans	*2 days*	1st course: 22 - 23 March		R5,595
			2nd course: 6 - 7 August
			3rd course: 29 - 30 October
*C201*	Asset Management for Maintenance Supervisors	*5 days*	1st course: 15 - 19 January		R13,975
			2nd course: 9 - 13 April
			3rd course: 9 - 13 July
			4th course: 20 - 24 August
			5th course: 8 - 12 October
			6th course: 26 - 30 November
*C301*	Maintenance Planning	*5 days*	1st course: 22 - 26 January		R13,975
			2nd course: 12 - 16 March
			3rd course: 14 - 18 May
			4th course: 13 - 17 August
			5th course: 17 - 21 September
			6th course: 12 - 16 November
			7th course: 10 - 14 December
*C301X*	Maintenance Planning Fundamentals	*3 days*	1st course: 22 - 24 January		R8,395
			2nd course: 12 - 14 March
			3rd course: 14 - 16 May
			4th course: 13 - 15 August
			5th course: 17 - 19 September
			6th course: 12 - 14 November
			7th course: 10 - 12 December
*C302*	Advanced Maintenance Planning	*5 days*	1st course: 12 - 16 February		R14,395
			2nd course: 16 - 20 April
			3rd course: 21 - 25 May
			4th course: 30 July - 3 August
			5th course: 15 - 19 October
			6th course: 3 - 7 December
*C501*	Maintenance Shutdown and Project Management (Please see footnote for computer requirement)	*5 days*	1st course: 19 - 23 February	5	R14,395
			2nd course: 7 - 11 May
			3rd course: 23 - 27 July
			4th course: 1 - 5 October
			5th course: 19 - 23 November
			6th course: 10 - 14 December
*C702*	Reliability Engineering in Asset Management (Please see footnote for computer requirement)	*5 days*	1st course: 16 - 20 April	5	R14,820
			2nd course: 11 - 15 June
			3rd course: 15 - 19 October
*C901*	Maintenance Practice for Asset Management Engineers (Please see footnote for computer requirement)	*5 days*	1st course: 29 January - 2 February	5	R13,975
			2nd course: 9 - 13 April
			3rd course: 2 - 6 July
			4th course: 3 - 7 September
*C902*	Leadership in Asset Management	*5 days*	1st course: 9 - 13 April	5	R13,975
			2nd course: 4 - 8 June
			3rd course: 16 - 20 July
			4th course: 27 - 31 August
			5th course: 26 - 30 November
*C903*	RCM Facilitation and Analysis (Please see footnote for computer requirement)	*5 days*	1st course: 26 February - 2 March	5	R13,975
			2nd course: 16 - 20 April
			3rd course: 11 - 15 June
			4th course: 10 - 14 September
			5th course: 5 - 9 November
			6th course: 3 - 7 December
*C904*	RCM ProAktiv, Advanced Reliability Centred Maintenance (Please see footnote for computer requirement) Please note that this course has a pre-requirement. Students must already have done both C702 and C903 before enrolling for this course. This is to ensure that participants will adequately cope with the course content. Exceptions to this rule is possible, but will have to be suitably motivated. This course thus builds on the foundation already established in our C702 and C903 courses. Apart from shortly revisiting the Reliability and RCM foundations, the student should be in a position to quickly grasp and use the advanced concepts as taught in this course.	*5 days*			R13,975



			1st course: 22 – 26 January
			2nd course: 28 May - 1 June
			3rd course: 3 - 7 September




*S801*	Reliability Centred Maintenance (Please see footnote for computer requirement)	*3 days*	1st course: 26 - 28 February	3	R8,395
			2nd course: 16 - 18 April
			3rd course: 11 - 13 June
			4th course: 10 - 12 September
			5th course: 5 - 7 November
			6th course: 3 - 5 December
*S802*	Asset Management for Executives	*3 days*	1st course: 26 - 28 March	3	R8,395
			2nd course: 7 - 9 May
			3rd course: 30 July - 1 August
			4th course: 19 - 21 September
			5th course: 12 - 14 November
*S803*	Root Cause Failure Analysis	*5 days*	1st course: 29 January - 2 February	5	R15,095
			2nd course: 5 - 9 March
			3rd course: 4 - 8 June
			4th course: 13 - 17 August
			5th course: 22 - 26 October
			6th course: 10 - 14 December
*S803X*	Root Cause Failure Fundamentals	*3 days*	1st course: 30 January - 1 February		R8,395
			2nd course: 6 - 8 March
			3rd course: 2 - 4 May
			4th course: 5 - 7 June
			5th course: 14 - 16 August
			6th course: 23 - 25 October
			7th course: 11 - 13 December
*S804*	Decision Making in Maintenance (Please see footnote for computer requirement)	*5 days*	1st course: 5 - 9 February	2	R14,820
			2nd course: 18 - 22 June
			3rd course: 1 - 5 October
			4th course: 3 - 7 December
*S805*	Maintenance Control	*2 days*	1st course: 19 - 20 March	2	R5,595
			2nd course: 20 - 21 August
			3rd course: 1 - 2 November
*S808*	Asset Management Logistics	*3 days*	1st course: 12 - 14 February		R8,395
			2nd course: 23 - 25 April
			3rd course: 25 - 27 June
			4th course: 25 - 27 September
*S811*	Water Treatment Plant Operation and Maintenance	*3 days*	1st course: 16 - 18 January		R9,550
			2nd course: 28 February - 2 March
			3rd course: 23 - 25 April
			4th course: 19 - 21 June
			5th course: 10 - 12 July
			6th course: 25 - 27 September
*S812*	Road Maintenance	*2 days*	1st course: 17 - 18 January		R5,595
			2nd course: 1 - 2 March
			3rd course: 27 - 28 June
			4th course: 25 - 26 July
			5th course: 26 - 27 September
			6th course: 24 - 25 October
*S813*	Economical Replacement and Life Cycle Management (Please see footnote for computer requirement)	*5 days*	1st course: 19 -23 February	5	R14,395
			2nd course: 23 - 27 July
			3rd course : 29 October - 2 November
*S820*	What is Asset Management and how does it differ from Maintenance?	*2 days*	1st course: 3 - 4 April		R5,595
			2nd course: 6 - 7 August
*S821*	Understanding ISO 55000	*3 days*	1st course: 19 - 21 June		R8,395
			2nd course: 10 - 12 October
*S822*	Implementing ISO 55000	*3 days*	1st course: 9 - 11 May		R8,395
*Diploma in Maintenance Management*		For comprehensive information on our choice of 5 diplomas,			R55,200
		please visit our website www.terotechnica.com

*Footnote*: Students enrolling for these courses, C501, C702, C901, C903, C904, S801, S804 and S813, must be in possession of their own laptop computers. Computers supplied by employers often have safety features installed which prevent students free access to all the programs and functions required for the course.



*In-house training:*

1.	Please note that considerable savings, both in time and money, can be brought about by having any of the above courses presented in-house. Attractive discounts are offered. Please contact us for quotations. Terms and conditions apply.

2.	Comprehensive information regarding all diplomas and courses is available on our website www.terotechnica.com

Published in Administration

Tuesday, 03 January 2017 12:57

Course information at a glance 2017

Course prices and other summary information - 2017

Course Code	Course Description	Duration	Course Dates	CPD Points	Cost (Ex VAT)
C101	Asset Management for Artisans	2 days	1st course: 24 to 25 April 2nd course: 3 to 4 August 3rd course: 13 to 14 November		R 5 320

C201	Asset Management for Maintenance Supervisors	5 days	1st course: 23 to 27 January 2nd course: 6 to 10 March 3rd course: 5 to 9 June 4th course: 14 to 18 August 5th course: 27 November to 1 December		R 13 307

C301	Maintenance Planning	5 days	1st course: 23 to 27 January 2nd course: 13 to 17 March 3rd course: 8 to 12 May 4th course: 3 to 7 July 5th course: 28 August to 1 September 6th course: 16 to 20 October 7th course: 20 to 24 November		R 13 307

C301X	Maintenance Planning Fundamentals	3 days	1st course: 18 to 20 April 2nd course: 12 to 14 June 3rd course: 1 to 3 August		R 7 982

C302	Advanced Maintenance Planning	5 days	1st course: 6 to 10 February 2nd course: 22 to 26 May 3rd course: 10 to 14 July 4th course: 11 to 15 September 5th course: 13 to 17 November		R 13 709

C501	Maintenance Shutdown and Project Management Important: See footnote regarding notebook computers	5 days	1st course: 30 January to 3 February 2nd course: 29 May to 2 June 3rd course: 30 October to 3 November	5	R 13 709

C702	Reliability Engineering in Asset Management Important: See footnote regarding notebook computers	5 days	1st course: 8 to 12 May 2nd course: 23 to 27 October	5	R 14 110

C901	Maintenance Practice for Asset Management Engineers Important: See footnote regarding notebook computers	5 days	1st course: 6 to 10 March 2nd course: 4 to 8 September	5	R 13 307

C902	Leadership in Asset Management	5 days	1st course: 13 to 17 February 2nd course: 15 to 19 May 3rd course: 17 to 21 July 4th course: 6 to 10 November	5	R 13 307

C903	RCM Facilitation and Analysis Important: See footnote regarding notebook computers	5 days	1st course: 3 to 7 April 2nd course: 26 to 30 June 3rd course: 14 to 18 August 4th course: 2 to 6 October	5	R 13 307

C904	RCM ProAktiv (advanced Reliability Centred Maintenance) Important: See footnote regarding notebook computers Important Note: Course participants must have either an engineering degree (B.Eng., BSc (Eng) or B.Tech), or must have successfully completed both C702 and C903 to qualify for registration for this course. This is to ensure that participants will adequately cope with the course content. Exceptions to this rule is possible, but will have to be suitably motivated.	5 days	1st course: 5 to 9 June 2nd course: 20 to 24 November		R 13 307

S801	Reliability Centred Maintenance Important: See footnote regarding notebook computers	3 days	1st course: 3 to 5 April 2nd course: 26 to 28 June 3rd course: 14 to 16 August 4th course: 2 to 4 October	3	R 7 982

S802	Asset Management for Executives	3 days	To be presented on request for groups of at least 4 delegates	3	R 7 982

S803	Root Cause Failure Analysis	5 days	1st course: 20 to 24 February 2nd course: 19 to 23 June 3rd course: 18 to 22 September 4th course: 27 November to 1 December	5	R 14 372

S803X	Root Cause Failure Analysis Fundamentals	3 days	1st course: 3 to 5 May 2nd course: 26 to 28 September		R 7 982

S804	Decision-making in Maintenance Important: See footnote regarding notebook computers	5 days	1st course: 27 February to 3 March 2nd course: 24 to 28 July 3rd course: 9 to 13 October	2	R 14 110

S805	Maintenance Control	2 days	1st course: 17 to 18 July	2	R 5 320

S808	Asset Management Logistics	3 days	1st course: 10 to 12 April 2nd course: 18 to 20 September		R 7 982

S811	Water Treatment Plant Operation and Maintenance	3 days	To be presented on request for groups of at least 4 delegates		R 9 095

S812	Road Maintenance	2 days	To be presented on request for groups of at least 4 delegates		R 5 320

S813	Assets: Economical Replacement and Life Cycle Management Important: See footnote regarding notebook computers	5 days	1st course: 27 to 31 March 2nd course: 11 to 15 September	5	R 13 709

S820	What is Asset Management and how does it differ from Maintenance?	2 days	3 to 4 April		R 5 320

S821	Understanding ISO 55000	3 days	24 to 26 July		R 7 982

S822	Implementing ISO 55000	3 days	6 to 8 November		R 7 982

	Diploma in Maintenance Management For comprehensive information on our choice of 5 diplomas, please click on the link above				R 52 579

Footnote:	Students enrolling for the following courses must be in possession of their own laptop computers: C501, C702, C901, C903, C904, S801, S804 and S813 The reason is that computers supplied by employers often have safety features installed which prevent students free access to the programs and functions required for these courses.

In-house training	Please note that considerable savings, both in time and money, can be brought about by having any of the above courses presented in-house. Attractive discounts are offered. Please contact us for quotations. Terms and conditions apply. Comprehensive information regarding all diplomas and courses is available on this website.

Published in Administration

Saturday, 05 July 2014 00:00

Terotechnica Maintenance College Brochures

The Terotechnica Maintenance College Brochures can be downloaded from here.

College Brochure:

Terotechnica Maintenance College Brochure.pdf

Course Catalogue:

Terotechnica Course Catalogue.pdf

Published in Administration

Monday, 23 June 2014 00:00

Terms

Payment Terms

A participant will only be enrolled after a fax with the completed enrollment form and deposit slip is received or after the completed form with a valid cheque is received via mail.

Payment can be made directly into M-Tech's bank account. The bank details are as follows:

Standard Bank, President Kruger Street, Vanderbijlpark.
Account Name: AM-Tech Raadgewende Ingenieurs
Account number: 42 077 893 4
Branch number: 014737
Account type: Current
SWIFT Code: SBZA ZA JJ

Terms and Conditions

Published in Administration

Monday, 23 June 2014 00:00

Application Form

The system for enrolment has been changed. The individual downloadable enrolment forms for single courses and for diploma study were replaced with one single web-based application form. It is not meant to enrol, but simply to start the process of talking to us. When you are then ready to enrol, the more comprehensive form will be provided to you by our Registrar, Me Annerie Terblanche.

To inquire / apply simply click on the button below and fill in the necessary detail.